Nauticam SMC-1 Super Macro Converter 81201
The Nauticam Super Macro Converter, (SMC) is fully optimized for in water use. This unique and innovative lens will change the way that underwater macro photography is done.
"This is the sharpest accessory macro lens I have used. Something that it is truly remarkable because it is also the most powerful. Fantastic performance from the centre of the frame to the corners. It is a lens that pushes back the boundaries of the types of photos we can take underwater." -Dr. Alex Mustard (www.amustard.com)
Key advantages of the Nauticam SMC-1 Macro Converter 81201
- Higher magnification than other macro tools
- Increased working distance
- Better edge to edge image quality
- Higher Contrast
- Less color fringing
- Compatible with “short” macro lenses that traditionally have not worked well with super macro accessories
Breakthrough Lens Design
Prior to the Super Macro Converter, achieving “super macro” underwater meant using tools that were designed for in air use. These tools simply do not take into account the physics of shooting in water. The SMC takes a radically different approach: treat the system - camera, lens, port, air, and water – as a whole, and account for the air-water interfaces in a conversion lens design to achieve the best image quality possible. The improvement is stunning, measurable and a new standard in underwater macro imaging has been established.
Edward Lai, Managing Director of Nauticam, has utilized a revolutionary approach in developing the SMC. This is a completely new lens design, developed through hundreds of engineering hours utilizing computer software to model the optical properties of the complete underwater imaging system. Incorporating these factors into the design yields amazing sharpness, contrast, and clarity that isn’t available from a simple magnifying lens for use in air sealed in a waterproof enclosure.
Uncompromised Optical Quality
The Super Macro Converter is constructed from lenses are precision crafted of specially formulated low dispersion optical grade glass, ground to the most demanding standards. These exceptional measures, enhanced by broadband anti-refective coatings, effectively reduce common optical issues such as chromatic aberrations, coma, spherical aberration, and field deformation. The optics are assembled in a rugged hard anodized aluminum housing, and nitrogen purged during assembly to eliminate fogging.
When combined with a full frame camera and a 100mm or 105mm macro lens, the device converts the optical system to provide a maximum of 2.3X magnification factor. In other words, a subject area of 15.6mm X 10.4mm will fill the whole frame of a 36mm X 24mm sensor.
Improved Sharpness and Contrast
As the Super Macro Converter is optimized explicitly for using together with a macro lens underwater, images captured exhibit exceptional sharpness compared with conventional magnification lenses. Thanks to the broadband multi-layer anti-reflection coating on each surface of the lenses, images also exhibit higher contrast.
Superb Light Transmission
All the lens elements installed inside the SMC are optically optimized to appropriate diameters so as to provide maximum light transmission. Hence, the NSC doesn’t encounter vignette issue under even the most extreme conditions. The broad band multi-layer anti-reflection coating on all surfaces also greatly improves light transmission.
Optimized for Autofocus
By utilizing a specially developed algorithm in the optimization process, the SMC renders superior image quality over the full focusing range of the camera lens (which becomes ~50 to ~100 mm in front of the SMC). Also benefitting from the high brightness and contrast of the image, the autofocus system of the camera usually works acceptably well within this range.
Ample Working Distance
Even at the maximum 2.3X magnification, there is still more than 50mm of working distance between the front element and the subject with 100/105mm macro lenses. This working distance is crucial when capturing behavior with skittish subjects.
High resolution was a primary design goal of the SMC project. This has been achieved using computer aided optimization and high grade optical glasses with unique refractive and dispersion properties. Images taken with this new system exhibit very high resolution and quality. Results have exceeded expectations, and these images rival the quality of the macro lens in air.
The Converter retains the optical properties of the macro lens for the whole system underwater, resulting in a blurred (out of focus) background that has a pleasing smoothness and creamy look, without the normal purple and green fringing.
Due to the overall superior optical performance of the SMC it is possible to shoot larger apertures with excellent image quality. This avoids reaching the diffraction limit of high resolution sensors, and allows selective focus effects with narrow depth of field in super macro images.
Compatibility of the Nauticam SMC-1 Macro Converter 81201
- Canon EF-S 60mm /2.8 Macro USM
- Canon EF 100mm /2.8L Macro IS USM
- Canon EF 100mm /2.8 USM
- AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED
- Panasonic Leica DG Macro-Elmarit 45mm f/2.8 ASPH. MEGA O.I.S.
- Olympus M.ZUIKO DIGITAL ED 60mm f/2.8 Macro
- Olympus 12-50mm f/3.5-6.3 ED M.Zuiko EZ Micro 4/3 Lens
- Sony RX-100 & RX-100M2
The Nauticam SMC-1 does not work with Nikon Nikkor 60mm f/2.8G ED Macro or the 60mm f/2.8 Micro-NIKKOR AF-D
This lens can be mounted directly to standard 67mm threaded ports by using the included adaptor.
The Nauticam Super Macro Converter has also been designed for use with 67mm flip holders from Nauticam. Unfortunately, it is not compatible with any flip adapters from Saga or Reefnet.
To use the Nauticam SMC-1 with Nauticam #25104 flip holder for Flat Port 72, or with Nauticam #25105 flip holder for 4" wide angle port, you will need the Nauticam #81222 M67 Adaptor Ring
Interested in even more challenging underwater macro photography? Add the Nauticam Multiplier I for SMC.